The EcoWasher® Pro box is on the laundry floor. You glance at your washer and wonder if the hookup fits.
Maybe it is a front-loader tucked in a closet. Maybe it is a top-loader in the garage.
You already own the machine. You want detergent-free laundry without a remodel. Is EcoWasher Pro installation the same on both washer types?
Short answer: Yes. Pro attaches to the washer you already own — either style — in about 10 minutes. Same idea for both; only the space and reach change.
What the hookup actually does
Cold supply water passes through EcoWasher® on the way into the washer. Ozone mixes into that cold wash water, then returns to ordinary oxygen.
You plug the unit into a normal outlet. After the one-time install, you set the washer to cold and start.
No detergent goes in the drum. Everyday loads never need laundry detergent again.
For your home, the shelf above the dryer stays clear. EcoWasher® also helps extend washing machine life.
For your time and money, there is nothing to measure before you press start. Load, pick cold, and go.
Comfort stays high when towels and tees come out soft, bright, and fresh. For the planet, cold washes skip heating the water, and fewer plastic bottles leave the house.
That path works with city water and hard or well water. One unit serves one washer — HE or standard.
Our guide to what ozone laundry is explains the idea in plain words.
Tip — Clear about 10 minutes, shut off the cold supply for a moment, and keep a towel handy for drips.
Top-load washers
On many top-loaders, the cold hookups sit where you can reach them. That makes the first install feel calm.
Pick a spot near power and the cold line. Keep hoses loose so nothing pulls when the tub fills.
Garage and basement top-loaders often have room beside or behind the machine. Place Pro where you can still open the lid with ease.
After setup, every load is the same: cold cycle, no jug. The laundry room feels simpler by the end of week one.
Front-load and stacked washers
Front-loaders and stacked pairs often hide hookups behind or above the cabinet. That is the main practical difference.
Ease the washer forward a little so you can see the cold inlet and shutoff. Give the hoses room and avoid kinks.
Closet installs need a clear path to the outlet too. Ease the unit back once joints feel snug and dry.
The kit does not change. You still run cold supply through Pro, then into the washer's cold inlet.
Stacked pairs follow the same path. Reach may take an extra minute; the fittings stay the ones in the manual.
Top-load vs front-load at a glance
The idea stays identical. Only reach and space tips differ. Scan the table, then open our EcoWasher comparison page if you are still choosing a model.
| Question | Top-load | Front-load |
|---|---|---|
| Works with Pro | Yes, HE or standard | Yes, HE or standard |
| Where hookups sit | Often easy to reach | Often behind or above |
| Space tip | Spot near power and cold | Give hoses room; no kinks |
| Wash setting | Cold | Cold |
| Detergent | None needed | None needed |
Pro works with either washer style, HE or standard. Exact fittings live in the downloadable user manual.
The 10-minute hookup, step by step
Use this calm order for both machine types. For fittings and photos, follow the EcoWasher setup guide and the Pro manual.
- Pick a spot near the cold line and a normal outlet. On a front-loader or stack, ease the machine forward a little first.
- Shut off the cold supply at the laundry shutoff. Keep a towel nearby.
- Connect cold supply → EcoWasher® Pro → washer cold inlet, following the downloadable manual for your fittings.
- Plug Pro into a normal outlet. Open the shutoff slowly and check every joint for drips.
- Run a short cold test load with no detergent. When you are done, register the unit to activate the 1-year warranty on our warranty page.
That is the whole install. After this, set cold and start — nothing else to measure.
Cold-water myths fade once the first week of loads lands soft and bright. See our cold-water laundry myths if you want a calm read later.
Pro, SE or EXL for your setup
Every EcoWasher® is built so everyday loads never need laundry detergent again. The ladder runs Pro, then SE, then EXL.
Pro is not a step down from SE; they are different feature sets. Each unit serves one washer.
- Original laundry-first EcoWasher® design
- About 16.5 x 8 x 6.5 in and 5 lbs
- No LCD, no auxiliary spray hose
- AC 100–240 V, ozone at 0.5–1.0 mg/L
- Easy about-10-minute install on the washer you own
- 1-year warranty with registration
- $337 sale, $397 regular
EcoWasher® Pro is the simple laundry-first pick when you want the hookup without a screen or hose.
| Pro | SE | EXL | |
|---|---|---|---|
| Best for | Simplest laundry-first setup | Screen plus spray hose | Heavy, repeated loads |
| Controls | No screen | LCD touch-control | Commercial-strength |
| Spray hose | None | Stainless sprayer | Stainless sprayer |
| Warranty | 1 year | 1 year | 2 years |
| Sale price | $337 | $397 | $597 |
Regular prices are $397 for Pro, $597 for SE, and $797 for EXL. See all three on our EcoWasher model comparison.
Pick Pro if you want the original unit at $337 on sale. Same cold hookup whether your drum opens on top or in front.
Pick SE if you want LCD touch controls and a stainless spray hose. See EcoWasher® SE.
Pick EXL if you run heavy, repeated loads. EcoWasher® EXL adds commercial-strength capacity and a 2-year warranty.
Our SE, Pro, or EXL picker and the Pro price and box guide fill in the buy picture.
The EcoWasher buyer's guide helps before you order. Eligible orders include free U.S. shipping and a 30-day money-back trial.
We help families make this switch, from picking a model to setting it up.
Related reading
Quick questions
Does EcoWasher® Pro work on top-load and front-load washers?
Yes. Pro attaches to either machine type, HE or standard. The hookup idea is the same for both.
How long does EcoWasher® Pro installation take?
Most homes finish the hookup in about 10 minutes. Follow the downloadable manual for the exact fittings on your machine.
Do I need a different kit for a front-load or stacked washer?
No. You use the same Pro unit. Slide the cabinet forward if hookups sit behind it, and keep hoses free of kinks.
Do I still use laundry detergent after Pro is installed?
No. Set the washer to cold and start. Everyday loads never need laundry detergent again.
Never Buy Laundry Detergent Again!
EcoWasher® Pro: laundry-first, detergent-free, 1-year warranty. $337 sale ($397 regular). Free US shipping and a 30-day money-back trial on eligible orders.
Shop EcoWasher® Pro → Compare models
EcoInnovations is an authorized U.S. reseller, and EcoWasher® is made by EcoInventions. We help families switch to detergent-free laundry.
